If you’re like me, you want to avoid any type of maintenance or repair on your tools. Sometimes, however, it’s impossible to avoid the moment when your reciprocating saw blade becomes dull.
This post will show you how to replace a blade on a craftsman reciprocatingsaw. Although it is not difficult, there are some things you should know to ensure safety and correct execution. Continue reading to learn how you can replace your old blade with a brand new one.
Your tools
To change your blade securely, you will need some things. You should now go looking for them if you don’t have them. These items include a Phillips screwdriver and small flathead screwdriver as well as pliers.
A new blade
Before you take apart your saw, make sure your blade is ready. The new blade should match the original one. It doesn’t matter if it is a hacksaw blade or a reciprocating saw blade. However, it must be exactly the same.
Plastic pan or bag to hold your old blade
There is a possibility that sparks could escape from the saw as you cut through metal. Sparks can fly into your work area, such as drywall, and cause fires. You should set up something, such as a plastic container, below your work area so that sparks don’t fly into it.
You can also place some concrete or stone on the floor if you don’t have something like that.
Disconnect the screws holding the blade guard in position:
These will be kept safe out of sight until you reassemble the saw.
You can use a screwdriver for this task, but not if it has a Phillips head (some older models may have a flathead). I would recommend using pliers to ensure you don’t strip the screws. They are easy to remove and very difficult to get out once they happen.
Unplug the saw
Before you start anything, unplug the saw and take out the battery pack. We don’t want anyone getting hurt if they bump into something. You can skip this step if there is no power.
Remove the blade cover
We are now ready to change the blade. First, remove the plastic blade cover, if you have one. A Sawzall is likely to have no obstructions. Reciprocating saws can sometimes have more obstacles.
Begin by inspecting all sides of the saw to determine if any bolts or screws are getting in your way.
Reverse to install the new blade
It is simple to reverse the process of taking it off. It is important to keep track and label all screws that you take out so they don’t get mixed up. Keep your saw apart so you don’t lose any parts.
If everything was done correctly, your saw should work just as well. Try again to see if you missed any steps. Good luck with your repairs!
Replace any screws damaged during the process
There is not much to be said here except that you must ensure that your screws are reattached exactly where they were originally placed. They must be secured during normal operation. Otherwise, any debris will get into the saw and prevent it from functioning properly.
Take care not to damage or bend anything when changing the blade. If you do, disassemble the saw and reassemble it using the correct procedures. You now know how to change the blade on a craftsman reciprocatingsaw. I hope this helps you to not hesitate to do it again. You will be amazed at how easy it is to repair your home with the right tools.
Safety Tips
1. Before you make any repairs to your saw, ensure that the power cord has been disconnected from the wall outlet. The right tools can make home repairs simple. Before you start a project with your saw, make sure to get all of your loose parts out of the way. Screws, nuts, bolts and blades are all examples of small parts.
2. When working with a saw, always wear safety glasses. Use the right tools to make home repairs simple.
3. Before you start working on your saw, make sure to secure all belongings. The right tools can make home repairs simple.
4. If you encounter any hazardous situations, such as broken blades or slipping parts or any other material, unplug the saw’s power supply immediately.
